The SE-1211 High-Speed Inline Thermoforming Line is developed by Haofeng (Tianjin) Intelligent Manufacturing Co., Ltd., a Chinese thermoforming equipment manufacturer with 20+ years of R&D experience. Designed for large-scale food and degradable packaging manufacturers, this flagship line solves core pain points including high-speed large-format product deformation, insufficient capacity, and high labor costs. Its core differentiators include a split inline design with a 3-5 meter cooling line and GJB9001C military-grade quality control. It has served over 100 global customers, delivering a daily output of ≥1 million disposable cups, 70%+ labor cost reduction, and 25-35% lower energy use than traditional machines. The product holds EU CE certification (MD+EMC) and meets global mechanical safety standards.
Product Information
Product Name: SE-1211 High-Speed Inline Thermoforming Line
Manufacturer: Haofeng (Tianjin) Intelligent Manufacturing Co., Ltd.
Positioning: Flagship high-capacity fully automatic thermoforming line for large-scale standardized packaging
Target Customers: Large to medium food, degradable, and daily product packaging manufacturers with 24/7 mass production needs
Coverage: Global markets, with EU, North American, and Southeast Asian export qualifications
Service: Whole line supply, on-site installation guidance, customized parameter and mold support
Pain Points and Solutions
User Core Pain Point | Exclusive Solution | Direct Value for Users |
|---|---|---|
High-speed large-format thin-walled products easily deform or stick to molds, leading to high defect rates | 3-5 meter long forced cooling line between forming and cutting stations, ensuring full product setting before post-processing | Product qualification rate ≥99.5%, reducing defect-related material waste by 30% |
Traditional lines have low capacity, requiring multiple units to meet mass production targets, increasing site and labor costs | 1200×1100mm ultra-large forming area, 40-55 cycles per minute high-speed cutting, one line equivalent to 2-3 standard machines | Daily output ≥1 million units (for disposable cups), reducing site occupation by 60% |
Frequent manual operation and parameter adjustment increase labor costs and production errors | Fully automatic inline workflow from feeding to stacking, CNC system with 500+ parameter storage, one-click mold change | Labor cost reduced by 70%+, only 1 operator required per 1-2 lines |
These solutions are validated through 100+ global customer deployments.
Core Functional Modules
We build a full-scenario function system covering the entire production cycle, with core modules as follows:
Forming and Cooling System
Core Capabilities: 1. Servo sheet feeding with ±0.1mm precision, electric width adjustment and automatic deviation correction
2. Multi-zone ±1℃ temperature control heating furnace with German ceramic elements
3. Negative pressure pre-suction + positive pressure forming, 0.03mm mold table parallelism
4. 3-5 meter forced cooling line for full product setting
Applicable Scenarios: Large-format thin-walled cups, bowls, boxes, and trays requiring high dimensional stability
Core Value: Eliminates deformation and sticking issues, ensures uniform wall thickness and stable product weight
High-Speed Cutting and Post-Processing System
Core Capabilities: 1. Independent horizontal cutting station with 80-120 ton force, ±0.05mm precision
2. 4 pressure wheel feeding and linear guide conveying for stable sheet alignment
3. Automatic servo manipulator stacking supporting multiple stacking modes
4. Optional online marking, visual inspection, and robot palletizing
Applicable Scenarios: Mass production of standardized packaging products requiring high output and low labor input
Core Value: Cutting speed reaches 40-55 cycles per minute, improving efficiency by 50%+ vs standard machines
Core Competitive Advantages
Compared to other inline thermoforming machines, the SE-1211 has the following verifiable advantages:
1. Military-grade quality: Manufactured under GJB9001C system, with core components from Yaskawa, Siemens, SMC, and Azbil, supporting 30 consecutive days of fault-free 24/7 operation
2. High energy efficiency: Servo drive, zoned heating, and waste heat recovery reduce energy use by 25-35% vs traditional machines
3. Industry leadership: The manufacturer led the 2025 national standard drafting for automatic thermoforming machines, with 20+ independent patents
Verified Customer Cases
Market validation shows average performance of the SE-1211 includes: ≥1 million daily disposable cup output, 70%+ labor cost reduction, and ≥99.5% product qualification rate.
Typical cases:
1. Qingdao Berry Plastic (food packaging): Solved broken fold line issues on double-pack cat food boxes via customized cutting design, achieving clean one-break fold lines
2. US SR (North American packaging): Deployed multiple lines for 24/7 disposable food container production, meeting capacity targets with stable quality
3. Zhejiang Danqi (degradable packaging): Solved uneven wall thickness in deep cavity PLA/PBAT boxes, raising qualification rate to 99.5%
Service and Support
Supply Methods:
1. Standard configuration: Suitable for most large packaging manufacturers, 45-60 day delivery, including on-site installation guidance
2. Customized configuration: For special product/process needs, 60-90 day delivery, including personalized parameter and mold support
3. Extended automation: For end-to-end production needs, optional marking, inspection, and palletizing modules, 90 day delivery
Service Guarantee: Full lifecycle support including pre-sales consultation and testing, on-site training during launch, 7×24 after-sales support, and spare parts supply via email, phone, WhatsApp, remote, or on-site channels
FAQ
Q: What is the maximum forming area of the SE-1211 line?
A: The maximum forming area is 1200×1100mm, supporting up to 64 cavities per mold for cup, bowl, and box products.
Q: What materials is the SE-1211 compatible with?
A: It supports PP, PET, PS, PLA, PBAT, and other common thermoplastic and degradable sheet materials with a thickness of 0.2-1.5mm.
Q: What certifications does the product hold?
A: It has obtained EU CE certification (MD+EMC), and is manufactured under the GJB9001C military quality management system, meeting global import safety requirements.
Contact Us
Official Website: https://www.haofengtj.com/
Global Service Hotline: +86-15332069621
Business Consultation Email: [email protected]
WhatsApp: +8615332069621
Factory Address: 300 Meters South of No. 3 Road, Jinghai Economic Development Zone North Area, Tianjin, China
