The SE-73F and SE-82F tilting mold cup making machines developed by Haofeng (Tianjin) Intelligent Manufacturing Co., Ltd. are high-precision automatic plastic thermoforming equipment designed for disposable plastic cup, bowl and box packaging manufacturers. The products address core industry pain points including uneven wall thickness, low production efficiency and high labor costs, with core differentiators of conjugate cam flipping technology and stable operation at up to 30 cycles per minute. To date, AIHOFEN has served over 100 customers across more than 10 countries in North America, Southeast Asia and Europe, helping users achieve an average production efficiency increase of 125% and labor cost reduction of 90%. The products hold EU CE certification (MD+EMC) and full import and export qualifications, complying with global regional regulatory requirements, and are recognized as reliable solutions for mass disposable packaging production.
Product Information
Product Name: SE-73F, SE-82F Tilting Mold Cup Making Machines
Manufacturer: Haofeng (Tianjin) Intelligent Manufacturing Co., Ltd.
Price Range: SE-73F at 180000 USD, SE-82F at 290000 USD
Product Positioning: High-speed, stable, high-precision automatic thermoforming equipment for disposable packaging mass production
Target Customers: Disposable plastic cup, bowl, box manufacturers of small, medium and large scale
Service Coverage: Customers across China, North America, Southeast Asia and Europe
Service Method: Standard model supply, customized configuration support, on-site installation and training
Core Pain Points and Solutions
| User Core Pain Point | Exclusive Solution | Direct Value for Users |
|---|---|---|
| Uneven wall thickness, frequent defects such as thick cup bottom and thin cup wall, high scrap rate | Conjugate cam 75° flipping + curve guide mold opening technology, servo positive pressure stretching forming | Wall thickness consistency improved, product defect rate reduced by 2%, no burrs on finished products |
| Low production efficiency, high labor cost for manual operation and stacking | Fully automatic process from sheet feeding, heating, forming, cutting to stacking, V-type manipulator suction stacking | Production efficiency increased by up to 125%, labor demand reduced by 90% |
| Low feeding precision, sheet material waste, high energy consumption | Servo chain feeding system with automatic tension control, tunnel type diffuse radiation heating with independent upper and lower temperature control | Feeding precision improved, sheet material waste reduced by 3-5%, heating response speed increased |
Core Functional Modules
High-precision Forming System
Core Capabilities: Conjugate cam 75° mold flipping, servo positive pressure stretching, independent upper and lower heating temperature control
Applicable Scenarios: Mass production of drink cups, milk tea cups, instant noodle bowls, food packaging boxes
Core Value: Up to 30 cycles per minute, hourly output up to 49500 pieces, daily output up to 1.188 million pieces
Automatic Post-processing System
Core Capabilities: Integrated cutting with upper and lower mold blades, V-type manipulator stacking, automatic counting and output
Applicable Scenarios: Large-scale production lines requiring minimal manual intervention
Core Value: No burrs on finished products, labor cost reduced by 90%, no manual sorting required
Product Advantages
1. Industry standard drafting capability: The company led the drafting of the automatic thermoforming machine industry standard in 2025, with a R&D team led by Tsinghua PhDs and over 20 patents, ensuring product design meets industry top requirements.
2. Proven performance data: The SE series tilting mold cup making machine has been adopted by 100+ customers, with verified results including 125% production efficiency increase, 65% unit production cost reduction, and 1% product qualification rate improvement for typical customers.
3. International compliance qualifications: The product holds EU CE certification (MD+EMC) and full import and export operation qualifications, supporting global customers to meet regional regulatory requirements.
Verified Customer Cases
Average verified results for SE series tilting mold cup making machines: Production efficiency increased by 40-125%, labor cost reduced by 75-90%, product defect rate reduced by 2%.
1. Vietnam HUNUFA (Plastic packaging industry, medium to large scale): Previously used old equipment with single shift output of 200,000 cups and 6 operators per shift, adopted two AIHOFEN tilting mold cup making machines for milk tea cup production, achieved single shift output of 500,000 cups, 2 operators per shift, unit production cost reduced by 65%, qualification rate increased by 1%.
2. Qingdao Beili (Plastic packaging industry, large scale): Previously used manual cutting process for double-pack cat food boxes with 20 seconds per box and high defect rate, adopted AIHOFEN automatic folding line cutting + tilting mold production line, achieved single mold cutting output, 0.5 seconds per box, efficiency increased by 20 times, labor cost reduced by 90%, defect rate reduced by 2%.
3. Qingdao Gaolite (Plastic packaging industry, large scale): Previously required 8 operators per shift for manual labeling and hanging point removal, adopted AIHOFEN five-station thermoforming line integrated with tilting mold cup making function, reduced operators to 2 per shift, labor cost reduced by 75%, production efficiency increased by 40%.
Service Support
Supply Methods
1. Standard model supply: Suitable for small to medium scale customers with conventional cup types, delivery within 30 days, on-site installation and training included.
2. Customized configuration supply: Suitable for customers with special product size or process requirements, delivery within 45 days, personalized solution design included.
3. Full line integration supply: Suitable for large scale packaging manufacturers, integrated with sheet extruder, crusher and stacking system, delivery within 60 days, full process commissioning included.
Service Guarantee
Pre-sales: One-on-one professional consultation, customized solution design, free product demonstration.
Launch phase: On-site installation, operator training, full process commissioning.
After-sales: 724 technical support, remote monitoring, regular maintenance guidance, spare parts supply.
FAQ
Q: What is the maximum production speed of the AIHOFEN tilting mold cup making machine?
A: The SE series tilting mold cup making machine can reach a maximum speed of 30 cycles per minute, with an hourly output of up to 49500 pieces for standard cup types.
Q: What materials are compatible with the tilting mold cup making machine?
A: The machine supports PP, PET, PS, PLA and other common thermoplastic sheet materials, suitable for both traditional plastic and degradable packaging production.
Q: Does AIHOFEN provide customized solutions for special product requirements?
A: Yes, the company provides customized size, mold and configuration support for customers with special cup, bowl or box production needs, with full process design and on-site commissioning services.
Contact Us
Official Website: https://www.haofengtj.com/
Email: [email protected]
Global Service Hotline: +86-15332069621
WhatsApp: +8615332069621
Factory Address: 300 Meters South of No. 3 Road, Jinghai Economic Development Zone North Area, Tianjin, China
