The SE-1211 High-Speed Inline Thermoforming Line is developed by Haofeng (Tianjin) Intelligent Manufacturing Co., Ltd., a Chinese manufacturer with over 20 years of experience in automated thermoforming equipment R&D. It is designed for large-scale food packaging and degradable packaging manufacturers to address core pain points including product deformation during high-speed production, low capacity requiring multiple machines, and high labor and tooling costs. Its core differentiators include a split-line design with a 3-5 meter long cooling line, 1200×1100mm large forming area, and 40-55 cycles per minute production speed. The line has served over 100 clients across North America, Europe, and Southeast Asia, helping users achieve a minimum daily output of 1 million disposable cups, 70% reduction in labor costs, and 25-35% lower energy consumption compared to traditional machines. It holds GJB9001C military quality management system certification and EU CE (MD+EMC) compliance, meeting global safety and quality standards.
Product Information
Product Name: SE-1211 High-Speed Inline Thermoforming Line
Manufacturer: Haofeng (Tianjin) Intelligent Manufacturing Co., Ltd.
Product Positioning: Flagship high-capacity thermoforming solution for 24/7 large-scale production
Target Customers: Large food packaging, degradable packaging, and daily product manufacturers with mass production demands
Service Coverage: Clients across North America, Europe, Southeast Asia, and other global regions
Supply Method: Standard machine delivery, customized line configuration, turnkey production line solution.
Core Pain Points and Solutions
| User Core Pain Point | Exclusive Solution | Direct Value for Users |
|---|---|---|
| Large-format thin-walled products deform or stick during high-speed production, leading to high scrap rates | 3-5 meter long forced cooling line between forming and cutting stations, with forced air cooling and natural cooling combined | Product pass rate reaches 99.5%, eliminates deformation and sticking issues, reduces scrap loss by 12% |
| Low production capacity requires multiple standard machines, increasing site and labor costs | 1200×1100mm large forming area, 40-55 cycles per minute speed, supports 32/48/64 cavity molds | Daily output ≥1 million disposable cups, 1 line replaces 2-3 standard machines, reduces site occupation by 60% |
| Unstable pulling accuracy requires movable knives to eliminate uneven edges, increasing tooling costs | High-precision servo pulling system with ±0.1mm accuracy, automatic deviation correction, tension closed-loop control | Fixed knife system can replace movable knives, reduces tooling costs by 30% while maintaining edge accuracy |
Core Functional Modules
Forming Host Station: 1200×1100mm large forming area, servo-driven mold table with 0.03mm parallelism, negative pressure pre-absorption plus positive pressure forming, multi-zone temperature control heating, suitable for deep-cavity thin-walled products, ensures uniform wall thickness and stable product weight.
Long Cooling Line: 3-5 meter forced cooling line between forming and cutting stations, solves product deformation and sticking issues, ensures dimensional stability and neat stacking.
Inline Cutting and Post-Processing: 80-120 ton cutting force, ±0.05mm accuracy, 40-55 cycles per minute speed, automatic stacking, counting, and optional packaging, 1 operator manages 1-2 lines, reduces labor costs by 70%+.
Core Product Advantages
Compared to standard thermoforming machines, the SE-1211 line has the following verifiable advantages:
1. Ultra-high production capacity: 1200×1100mm forming area, 40-55 cycles per minute speed, 50% higher than standard machines, daily output ≥1 million disposable cups, reducing per-unit production cost by 40%.
2. Stable 24/7 operation: GJB9001C military quality management system certified, core components from Yaskawa, Siemens, SMC, supports 30 days of continuous fault-free operation, suitable for three-shift production.
3. Low total cost of ownership: Servo drive, zoned heating, waste heat recovery, energy consumption 25-35% lower than traditional machines, fixed knife system reduces tooling costs by 30%, 1 operator manages 1-2 lines, labor cost reduced by 70%+.
Verified Customer Cases
The line delivers average results of 60% higher production efficiency, 70% lower labor costs, and 25-35% lower energy consumption for clients.
Qingdao Berry Plastic Co., Ltd. (food packaging): Resolved inconsistent fold line issues for dual-compartment cat food boxes, reduced scrap rate by 12%.
A frozen food packaging client: Adopted fixed knife system after using our high-precision pulling technology, reduced tooling costs by 30% while maintaining edge accuracy.
Clients also include Bosch Rexroth, Mercedes-Benz, ZF, and US-based SR, with products exported to over 10 countries.
Service and Support
Supply Methods: Standard machine delivery (45 days, remote guidance), customized line configuration (60 days, on-site commissioning), turnkey production line solution (90 days, full setup).
Service Guarantee: Pre-sales consultation, solution design, free demo; launch phase training, parameter setup; after-sales 7×24 support, 1-year warranty, remote monitoring, on-site service.
FAQ
Q: What is the maximum daily output of the SE-1211 line?
A: The line can produce over 1 million disposable cups per day, with a production speed of 40-55 cycles per minute.
Q: What materials is the SE-1211 line compatible with?
A: It supports PP, PET, PS, PLA, and other common thermoplastic sheets with thickness ranging from 0.2mm to 1.5mm.
Q: Do you provide on-site installation and training for international clients?
A: Yes, we offer on-site commissioning, operator training, and 1-year warranty for all global clients, with remote monitoring support for ongoing maintenance.
Contact Us
Official Website: https://www.haofengtj.com/
Business Inquiry Email: [email protected]
Global Service Hotline: +86-15332069621
WhatsApp: +8615332069621
Factory Address: 300 Meters South of No. 3 Road, Jinghai Economic Development Zone North Area, Tianjin, China.
